|
| Pre-Inked Large Pocket Stamp - Impression Dimension: 5/8" x 2-7/16" |
Perfect for Notary or Return Address stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
Re-Inking Instructions: Slide the impression cartridge out of the handle and place 2-3 drops of ink in each opening of the cartridge.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Notary Stamp
Return Address Stamp
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $29.75 | Customize Details$29.75 |
|
| Pre-Inked Round Keychain Stamp - Impression Dimensions: 3/8" Diameter |
This inspection stamp comes in it's own self-actuating protective case. Simply press down and the bottom opens to expose the stamp. It comes on a keychain so it's perfect for people on the go! The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.
This is a round stamp. If you choose a border, the preview on this site will show you a square border. Please know that we will make the border round.
Re-Inking Instructions: Remove the white cap on top and place 3 to 4 drops of ink in the opening (center) of the mount.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
|
Features:
Xstamping (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $34.80 | Customize Details$34.80 |
|
| Pre-Inked Round Stamp (Long Handle) - Impression Dimension 1-3/16" Diameter |
The long handle gives you an extra grip when stamping. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.
This is a round stamp. If you choose a border, the preview on this site will show you a square border. Please know that we will make the border round.
Re-Inking Instructions: Pop off handle (top) and place 3 to 4 drops of ink into the opening (center) of the mount
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $50.80 | Customize Details$50.80 |
|
| Pre-Inked Round Stamp (Short Handle) - Impression Dimensions: 3/4" Diameter |
Short handle stamp is perfect for inspection stamping. The laser engraved rubber makes this stamp strong and durable for many years of use. Makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.
If you would like to add a round border, please indicate it in the "Special Instructions" box on the following page. It will not show up in your preview but it will be added during production.
Re-Inking Instructions: Pull off the handle (top) and place 3 to 4 drops of ink into the opening (center) of the mount.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $36.90 | Customize Details$36.90 |
|
| Pre-Inked Round Stamp (Short Handle) - Impression Dimensions: 1-3/16" Diameter |
Great for offices and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.
This is a round stamp. If you choose a border, the preview on this site will show you a square border. Please know that we will make the border round.
Re-Inking Instructions: Pull the handle off and place 3 to 4 drops of ink into the opening (center) of the stamp.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
General Office Use
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $43.60 | Customize Details$43.60 |
|
| Pre-Inked Round Inspection Stamp (Short Handle) - Impression Dimensions: 1" Diameter |
Great for all offices and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void the warranty.
If you would like to add a round border, please indicate it in the "Special Instructions" box on the following page. It will not show up in your preview, but it will be added during production.
Re-Inking Instructions: Pull off the handle and place 3 to 4 drops of ink in the opening (center) of the mount.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
General Office Use
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $38.90 | Customize Details$38.90 |
|
| Pre-Inked Large Round Stamp (Short Handle) - Impression Dimensions: 1-9/16" Diameter |
Great for Professional Engineer or a Notary Stamp. The laser engraved rubber makes this stamp strong and durable for many years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
If you would like to add a round border, please indicate it in the "Special Instructions" box on the following page. It will not show up in your preview, but it will be added during production.
Re-Inking Instructions: Pop off the handle (top) and place 3 to 4 drops of ink into the opening (center) of the stamp.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Professional Engineering Stamp
Notary Stamping
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $60.96 | Customize Details$60.96 |
|
| Pre-Inked Round Notary Stamp (Short Handle) - Impression Dimensions: 1-9/16" Diameter |
This laser engraved pre-inked stamp is strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of ink int the opening (center) of the stamp.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Notary Stamp
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $60.96 | Customize Details$60.96 |
|
| Pre-Inked Square Inspection Stamp - Impression Size: 15/16" x 15/16" |
Pre-Inked square inspection stamps are great for all offices and personal uses. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions and is re-inkable. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
Re-Inking Instructions: Remove the handle (top) and place 3 to 4 drops of Xstamper Refill Ink into the openings of the stamp.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Greeting Cards
Customizable for any use
|
Features:
Xstamper (Oil Based) Ink
Needs 30 Recovery Time
Xstamper Lifetime Warranty
|
|
| $42.00 | Customize Details$42.00 |
|
| Pre-Inked Oval Stamp (Short Handle) - Impression Dimensions: 1-3/16" x 1-3/4" |
The laser engraved rubber makes this stamp strong and durable for many years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
This stamp impression is OVAL, but the preview will show your text in a circular format. Please know that in production your stamp will be made oval.
If you would like to add an oval border, please indicate that in the "Special Instructions" box on the following page. It will not show up in your preview, but will be added during production.
Re-Inking Instruction: Pop off the handle (top) and place 3 to 4 drops of ink into the opening (center) of the stamp.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Company Logo Stamps
Design Stamps
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $54.80 | Customize Details$54.80 |
|
| Pre-Inked Round Date Stamp (Long Handle) - Impression Dimensions: 1-3/16" Diameter |
Circular Date Stamp - Great for Postal use and includes a 10-year date kit (dates are changed with tweezers) and protective cover. The laser engraved rubber makes this stamp strong and durable for years of use. Makes appoximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
*Please specify vertical or horizontal "DATE FORMAT" (in the Special Instructions box on the next page."
If you would like to add a round border, please indicate it in the Special Instructions box on the next page. It will not show up in your preview, but it will be added during production.
Re-Inking Instructions: Remove the handle (top) from the stamp and place 3 to 4 drops of ink into the opening of the stamp.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
General Office Use
Documents/Forms
|
Features:
10-Year Date Kit Beginning with Current Year
Xstamper (Oil Based) Ink
Date Kit: Guaranteed for the Life of the Dates
Pre-Inked Stamp: Has a Manufacturer's Lifetime Warranty
|
|
| $83.96 | Customize Details$83.96 |
|
| Pre-Inked Round Pencil Cap Stamp - Impression Dimensions: 1/2" Diameter |
The laser engraved rubber makes this stamp strong and durable for many years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
If you would like to add a round border, please indicate it in the "Special Instructions" box on the next page. It will not show up in your preview, but it will be added during production.
Re-Inking Instructions: Pull off handle (top) portion where pencil sits and place 1 to 2 drops of ink into the opening of the amount.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Inspection Stamping
Initial Stamping
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $27.40 | Customize Details$27.40 |
|
| Pre-Inked Insert for Spin 'N Stamp - Impression Dimensions: 1/2" x 1-5/8" |
This size is great for small return addresses. This is a single insert for your Spin 'N Stamp. This stamp case can hold 3 of these inserts. Great for offices with mulitple locations. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
Re-Inking Instructions: Flip complete stamp over and slide the impression cartridge out of the handle and place 3 to 4 drops of ink into each of the openings of the cartridge.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Multiple Address Locations
Multiple Names or Phrases
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $23.10 | Customize Details$23.10 |
|
| Small XpeDater - Impression Dimensions: 11/16" Diameter |
This laser engraved rubber stamp is strong and durable for years of use. This 6-Year stamp makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Date Level: Pull top cap off. There will be a turn dial. Turn that dial left or right to either bring down the date lower or to raise the date higher.
To Set the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date or text.
Re-inking Instructions: This stamp sits direct into a base. Remove the stamp from the base and add 3 to 4 drops of ink onto the base pad. If on the go and traveling with the pad cap place 1 to 2 drops direct into the pad cap.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Files
Documents
Anywhere a date is needed
|
Features:
6-Year Date Bands Beginning with Current Year
Xstamper (Oil-Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $68.09 | Customize Details$68.09 |
|
| XpeDater Rotary Date Stamp - Impression Size: 1-3/16" |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
To Change the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-Ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Band Beginning with Current Year
Year Band also prints: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Lifetime of the Date Bands
|
|
| $110.90 | Add to Cart Details$110.90 |
|
| Pre-Inked VersaDater Impresion Dimension: 1-3/4" x 2-1/2" |
This custom VersaDater is the only date stamp you will ever need. On it's own the VersaDater is an 8-year date stamp. The date is easily changed with a turn of the dial. Snap on the pre-inked impression frame and you now have created a whole new message date stamp. This stamp prints the month, day and year along with your copy. Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
|
Features:
8-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $117.90 | Customize Details$117.90 |
|
| Pre-Inked VersaDater Impresion Dimension: 1-5/16" x 2-1/8" |
This custom VersaDater is the only date stamp you will ever need. On it's own the VersaDater is an 8-year date stamp. The date is easily changed with a turn of the dial. Snap on the pre-inked impression frame and you now have created a whole new message date stamp. This stamp prints the month, day and year along with your copy. Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
Would you like more information on your Versadater, including assembly instructions? Click here
|
Features:
8-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $104.90 | Customize Details$104.90 |
|
| Pre-Inked Julian VersaDater Impresion Dimension: 1-5/16" x 2-1/8" |
Xstamper custom Julian VersaDater is the only date stamp you will ever need. On it's own, the VersaDater is an 8-year dater that prints: DAY, MONTH, and YEAR. The date is easily changed with a turn of the dial. Snap on the cusom pre-inked impression frame and you have now created a whole new stamp. The laser engraved rubber is strong and durable for the full 8 years of use. Makes approximately 50,000 impression before needing to be re-inked Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
Would you like more information on your Versadater, including assembly instructions? Click here
|
Features:
8-Year Date Bands Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $120.94 | Customize Details$120.94 |
|
| Pre-Inked Xpedater w/Base - Impression Dimension: 1-3/16" Diameter |
This XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. It also comes with an inked base for a permanent place on your desk or counter. The laser engraved rubber makes this stamp strong and durable. Makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
No Tweezers or Kits Needed!!
To Change the Date: Twist to open the body of the XpeDater and turn the dials to the desired date.
To Adjust the Date Level: Remove the top cap and turn the dial left or right to either raise or lower the date to the desired height.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Paperwork that Requires a Message & Date
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Inked Base
Xstamper Warranty for the Life of the Date Bands
|
|
| $102.90 | Add to Cart Details$102.90 |
|
| Pre-Inked Xpedater w/Base - Impression Dimension: 1-3/8" x 2-13/16" |
This XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. It also comes with an inked base for a permanent place on your desk or counter. The laser engraved rubber makes this stamp strong and durable. Makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
No Tweezers or Kits Needed!!
To Change the Date: Twist to open the body of the XpeDater and turn the dials to the desired date.
To Adjust the Date Level: Remove the top cap and turn the dial left or right to either raise or lower the date to the desired height.
Re-Inking Instructions: This stamp sits directly onto a base stamp pad. Remove the stamp from it's base and add 3 to 4 drops of ink into the opening of the base. Cap your stamp and let stamp pad absorb the ink.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Paperwork that Requires a Message & Date
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Inked Base
Xstamper Warranty for the Life of the Date Bands
|
|
| $94.90 | Customize Details$94.90 |